|
|
Traffic Gate, Air Operated
Options
| |
|
|
Overview
Features
- Pneumatically controlled gate arm with adjustable up and down speeds
- Reflective gate arm decal increases customer visibility during low light hours of the day
- Corrosion resistant powder coated steel frame and composite covers
- Paintable plastic housing to aesthetically match existing wash operations
Overview
The WashTools Traffic Gate is a device that can be incorporated into your tunnel to assist in traffic control during the payment, loading and exiting processes of your operation. The gate consists of a floor mounted base that houses the gate arm, air valve, air cylinder and linkage. The arm is driven up, and down by air pressure and also includes a spring which will return the gate arm to the up position in the event of air pressure loss. A simple air valve controls the cylinder and an included filter regulator and lubricator assembly feeds the valve.
Tech Specs
| General |
|
Product Type |
Traffic Gate |
| |
Series |
Air Operated Traffic Gate |
| |
Manufacturer |
WashTools |
| |
|
|
| Final Installation Dimensions |
| |
Dimensions |
Gate Body - 52.25" High x 17.81" Diameter, A 2.38" Diameter Gate Arm extends 70" from the gate body. |
| |
Weight |
TBD Lbs |
| |
|
|
| Materials, Construction and Finish |
| |
Structural Frame |
Carbon Steel, Powder coated |
| |
Covers |
Plastic, Paintable |
| |
Gate Arm |
PVC |
| |
Fasteners |
Stainless Steel |
| |
|
|
| Equipment Mounting Method |
| |
Foot Pads |
(1) foot pad (15.75" diameter x .38" Thick) |
| |
Bolt Configuration |
(4)-1/2" Concrete anchor locations per pad |
|
|
|
| Bearings |
|
Type |
(2)-Pillow Block |
| |
Finish |
Composite |
| |
Grease Fittings |
No |
| |
|
|
| Warranty |
| |
Manufacturer |
WashTools standard limited warranty |
| |
|
|
| Shipping |
| |
Parcel # |
Quantity - Description - Dimensions - Weight (each) |
| |
Parcel #1 |
(X) - Description - XX" High x XX" Wide x XX" Length - XX Lbs |
| |
Parcel #2 |
(X) - Description - XX" High x XX" Wide x XX" Length - XX Lbs |
| |
Parcel #3 |
(X) - Description - XX" High x XX" Wide x XX" Length - XX Lbs |
| |
Parcel #4 |
(X) - Description - XX" High x XX" Wide x XX" Length - XX Lbs |
| |
|
|
Included
Items Included
- Gate base and arm
- Air valve, gate arm cylinder and linkage
- Air filter, regulator and lubricator
- Service Pack documentation
Items NOT Included
- Gate open and close control signals
- Floor anchors and shims
- Polytube
- Low voltage wires
Installation
The installation of the TBD system is straight forward. The Service Pack documents that are provided with the product shipment include complete installation and startup instructions.
| General |
| |
People Required |
1-2 People |
| |
Mechanical Skill Level |
Basic - Mounting of equipment |
| |
Electrical Skill Level |
Basic - Three phase power and knowledge of local codes is required |
| |
Pneumatic Skill Level |
Basic - Plumbing pneumatic valve |
| |
Fluid Skill Level |
NA |
| |
Chemical Knowledge |
NA |
| |
|
|
| Tools and Equipment Needed |
| |
Unpacking |
Normal hand tools |
| |
Erection |
Measuring tools needed for positioning and hammer drill for floor anchors |
| |
Assembly |
Normal hand tools |
| |
Wiring |
Normal electrical wiring tools |
| |
Startup |
Electrical meter helpful but not required |
| |
|
|
| Estimated Timeline |
|
Detail |
This is the time estimate for installation of the traffic gate only. This does not include any electrical panels, controller wiring or other equipment or systems. |
|
Unpacking |
30 minutes |
|
Preparation Assembly |
30 minutes |
|
Frame Erection |
1 hour |
| |
Wiring |
1 hour |
| |
Fluid Connections |
1 hour |
| |
Startup & adjustment |
1 hour |
| |
|
|
| Electrical Utility Connections |
|
Air Valve Power Requirements |
6 VA @ 24 VAC |
|
Air Valve Power Connection Type |
(2) lead wires per valve |
| |
|
|
| Pneumatic Utility Connections |
|
Flow and Pressure |
.1 CFM @ 40 PSI |
|
Incoming Connection Type and Size |
1/4" Tube fitting |
|
Filter Included |
Yes |
| |
Regulator Included |
Yes |
|
Lubricator Included |
Yes |
| |
Outgoing Connection Type and Size |
1/4" tube fitting |
| |
Air Pressure Control |
Yes |
|
Air Flow Control |
Yes, (2) needle valves on cylinder |
| |
|
|
| Equipment Connections |
| |
Air Lines |
|
| |
Incoming Connection Type and Size |
1/4" tube fitting |
| |
Incoming Flow and Pressure |
.1 CFM @ 40 PSI |
| |
Outgoing Connection Type and Size |
1/4" tube fitting |
| |
Electric Lines |
|
| |
Incoming Connection Type and Size |
(2) lead wires per valve |
| |
|
|
All efforts are made to keep these details current but all prices, specifications, availability and terms are subject to change without notice. Taxes, fees, shipping and handling charges are extra and may vary. Valid for United States online purchases through the WashTools site only. WashTools cannot be responsible for pricing or other errors, and reserves the right to cancel orders arising from such errors.
WashTools: TG-3200 Rev 01, JS/ST
|
|
|