|
|
Tire Brush Module, Bristle
Options
| |
|
|
Overview
Features
- Stainless steel and other corrosion resistant materials ensure long life and reliability
- Dual pressure regulators allow for independent pressure adjustments to the driver and passenger side tire brush
- Retract cylinder mechanism comes standard on all tire brush systems
- UHMW guide rails on the entrance and exit end of the brush allow for the vehicle to have smooth transitions into and out of the brush module
- 96" long brush ensures complete coverage of standard to low profile tires
Overview
The WashTools Tire Brush Module is a complete tire cleaning system designed to target both standard sized and low profile tires. Each brush is 96" long by 8" in diameter to give complete coverage to the tire as it rolls through the wash process. Each brush has a directly driven hydraulic motor. The included retract cylinders have independent pressure regulators allowing easy adjustment of pressure against the vehicles tires and air over oil controls ensure smooth controlled motion.
Tech Specs
| General |
|
Product Type |
Friction Wash |
| |
Series |
Tire Brush Module |
| |
Manufacturer |
WashTools |
| |
|
|
| Final Installation Dimensions |
| |
Dimensions |
21.75" High x 36.00" Wide x 132.00" Length - Drivers side, 21.75" High x 55.75" Wide x 145.00" Length - Passenger side |
| |
Weight |
770 Lbs |
| |
|
|
| Required Bay Dimensions |
| |
Minimum Bay Height |
See Final Installation Dimension |
| |
Minimum Bay Width |
15' |
| |
Minimum Bay Length |
See Final Installation Dimension |
| |
|
|
| Materials, Construction and Finish |
| |
Structural Frame |
Stainless steel |
| |
Legs |
Stainless steel |
| |
Feet |
Stainless steel |
| |
Fasteners |
Stainless steel |
| |
|
|
| Equipment Mounting Method |
| |
Foot Pads |
(2) Stainless steel foot pads (11.75" Wide x 67.00" Length x .19" Thick) |
| |
Bolt Configuration |
(11)-1/2" Concrete anchor locations per pad |
| |
|
|
| Hydraulic Motor(s) |
| |
Quantity |
2 |
| |
Displacement |
4.00 cu in (each) |
| |
Finish |
Painted |
| |
|
|
| Bearings |
|
Type |
(16)-Pillow Block & (4) Hanger |
| |
Finish |
Pillow Block - Zinc Coated, Hanger - Zinc Coated |
| |
Grease Fittings |
Pillow Block - Yes, Hanger - Yes |
| |
|
|
| Cleaning Material |
| |
Type |
50/50 Nylon and silicon bristle |
| |
Color |
Black |
| |
Overall Diameter |
8" |
| |
|
|
| Controller Output Requirements |
| |
Standard |
|
| |
Number 1 |
Brush Extend |
| |
Optional |
|
| |
Number 1 |
Hydraulic Pump On |
| |
|
|
| Warranty |
| |
Manufacturer |
WashTools standard limited warranty |
| |
|
|
| Shipping |
| |
Parcel # |
Quantity - Description - Dimensions - Weight (each) |
| |
Parcel #1 |
(1) - Tire Brush Module - 40.00" High x 52.00" Wide x 122.00" Length - 790 Lbs |
| |
|
|
Included
Items Included
- Stainless steel frames and 8" diameter brushes
- Completely assembled motor, coupling and manifold assembly
- Air regulator and valve
- Service Pack documentation
Items NOT Included
- Floor anchors and shims
- Wall anchors
- Upstream ball valve
- High pressure hose
- Polytube
- Hydraulic unit
- Hydraulic fluid
Installation
The installation of the Tire Brush Module is straight forward. The Service Pack documents that are provided with the product shipment include complete installation and startup instructions.
| General |
| |
People Required |
1 Person |
| |
Mechanical Skill Level |
Basic - Mounting equipment |
| |
Electrical Skill Level |
Basic - Wiring of air valve |
| |
Pneumatic Skill Level |
Advanced - Air valves and switches need to be adjusted during the install to optimize the performance |
| |
Fluid Skill Level |
Basic - High pressure pump and hydraulic connections required |
| |
Chemical Knowledge |
NA |
| |
|
|
| Tools and Equipment Needed |
| |
Unpacking |
Normal hand tools |
| |
Erection |
Measuring tools needed for positioning and hammer drill for floor anchors. |
| |
Assembly |
Normal hand tools |
| |
Wiring |
Normal electrical wiring tools |
| |
Startup |
Normal hand tools |
| |
|
|
| Estimated Timeline |
|
Detail |
This is the time estimate for installation of the tire brushes only. This does not include any electrical panels, controller wiring or other equipment or systems. |
|
Unpacking |
1 hour |
|
Preparation Assembly |
1 hour |
|
Frame Erection |
2 1/2 hours |
| |
Fluid Connections |
3 hours |
| |
Startup & adjustment |
2 hours |
| |
|
|
| Pneumatic Utility Connections |
|
Flow and Pressure |
.2 CFM @ 100 PSI |
|
Incoming Connection Type and Size |
3/8" tube fitting |
|
Filter Included |
No |
| |
Regulator Included |
Yes |
|
Lubricator Included |
No |
| |
Outgoing Connection Type and Size |
3/8" tube fittings |
| |
Air Pressure Control |
Yes |
|
Air Flow Control |
Each Turret Gun has a Tracking and Return flow adjustment |
| |
|
|
| Equipment Connections |
| |
Air Lines |
|
| |
Incoming Connection Type and Size |
3/8" tube fitting |
| |
Incoming Flow and Pressure |
.2 CFM @ 100 PSI |
| |
Outgoing Connection Type and Size |
3/8" tube fittings |
| |
Hydraulic Lines |
|
| |
Incoming Connection Type and Size |
1/2" NPT |
| |
Incoming Flow and Pressure |
8 GPM @ 900 PSI |
| |
Outgoing Connection Type and Size |
1/2" NPT |
| |
Plumbing Configuration |
Series |
| |
|
|
All efforts are made to keep these details current but all prices, specifications, availability and terms are subject to change without notice. Taxes, fees, shipping and handling charges are extra and may vary. Valid for United States online purchases through the WashTools site only. WashTools cannot be responsible for pricing or other errors, and reserves the right to cancel orders arising from such errors.
WashTools: TB-1500 Rev 01, JS/ST
|
|
|