|
|
Side Brush Retract Kit
Options
| |
|
|
Overview
Features
- Air valve allows a set of Side Brushes to be retracted for vehicles that are not receiving that service in the wash process
- Air over oil reservoirs provide a dampened controlled motion to both sides of the retract cylinder
Overview
The WashTools Side Brush Retract Kit are (2) sets of air over oil reservoirs designed to plum into an existing set of Wash Tools Side Brushes. The drivers side and passenger side brush each have a set of reservoirs that are attached to both the pivot end inlet and the rod end inlet of the cylinder. Feeding each set of reservoirs is an air valve which when energized (opened) will extend the brushes wash the vehicle.
Tech Specs
| General |
|
Product Type |
Side Brush |
| |
Series |
Retract Kit |
| |
Manufacturer |
WashTools |
| |
|
|
| Materials, Construction and Finish |
| |
Structural Frame |
Stainless steel |
| |
Legs |
Stainless steel |
| |
Feet |
Stainless steel |
| |
Fasteners |
Stainless steel |
| |
|
|
| Controller Output Requirements |
| |
Standard |
|
| |
Number 1 |
Retract Valve On (open) |
| |
|
|
| Warranty |
| |
Manufacturer |
WashTools standard limited warranty |
| |
|
|
| Shipping |
| |
Parcel # |
Quantity - Description - Dimensions - Weight (each) |
| |
Parcel #1 |
(1) - Complete Assembly - 5.00" High x 10.00" Wide x 13.00" Length - 15 Lbs |
| |
|
|
Included
Items Included
- (2) Sets of stainless steel reservoirs with dipsticks
- Retract air valve
- Polytube
- Service Pack documentation
Items NOT Included
Installation
The installation of the Retract Kit is straight forward. The Service Pack documents that are provided with the product shipment include complete installation and startup instructions.
| General |
| |
People Required |
1 |
| |
Mechanical Skill Level |
Basic - Mounting equipment |
| |
Electrical Skill Level |
Basic - Wiring of air valve |
| |
Pneumatic Skill Level |
Basic - Plumbing pneumatic valve |
| |
Fluid Skill Level |
NA |
| |
Chemical Knowledge |
NA |
| |
|
|
| Tools and Equipment Needed |
| |
Unpacking |
Normal hand tools |
| |
Erection |
Normal hand tools |
| |
Assembly |
Normal hand tools |
| |
Startup |
Normal hand tools |
| |
|
|
| Estimated Timeline |
|
Detail |
This is the time estimate for installation of the retract kit only. This does not include any electrical panels, controller wiring or other equipment or systems. |
|
Unpacking |
10 minutes |
|
Preparation Assembly |
30 minutes |
|
Frame Erection |
1 hour |
| |
Fluid Connections |
1/2 hour |
| |
Startup & adjustment |
1 hour |
| |
|
|
| Electrical Utility Connections |
|
Air Valve Power Requirements |
6 VA @ 24 VAC |
|
Air Valve Power Connection Type |
1/4" Tube fitting |
| |
|
|
| Pneumatic Utility Connections |
|
Flow and Pressure |
.1 CFM @ 40 PSI |
|
Incoming Connection Type and Size |
1/4" Tube fitting |
|
Filter Included |
No |
| |
Regulator Included |
No |
|
Lubricator Included |
Yes |
| |
Outgoing Connection Type and Size |
1/4" tube fitting |
| |
|
|
| Equipment Connections |
| |
Air Lines |
|
| |
Incoming Connection Type and Size |
1/4" tube fitting |
| |
Incoming Flow and Pressure |
.1 CFM @ 40 PSI |
| |
Outgoing Connection Type and Size |
1/4" tube fitting |
| |
|
|
All efforts are made to keep these details current but all prices, specifications, availability and terms are subject to change without notice. Taxes, fees, shipping and handling charges are extra and may vary. Valid for United States online purchases through the WashTools site only. WashTools cannot be responsible for pricing or other errors, and reserves the right to cancel orders arising from such errors.
WashTools: SB-3601 Rev 01, JS/ST
|
|
|