|
|
Side Brush, Electric Drive 30" Tall
Options
| |
|
|
Overview
Features
- Non absorbent foam cleaning material reduces damage potential by not absorbing debris that may scratch vehicle surfaces
- Minimal side pressure regulator adjustments are needed during the wash day as the material impingement remains constant due to non absorbent cleaning material
- Stainless steel frame and side arm construction
- Fluid manifold to provide lubrication and rinsing for cleaning material
- Wet environment TEFC motor eliminates hydraulic drive system inefficiencies and leak potential on to vehicle and cleaning material
- Direct drive system ensures low maintenance and reliable performance
- Easy loading or replacement of foamed material
Overview
The WashTools 30" Electric Side Brushes provide excellent cleaning coverage to the lower section of vehicles. The brushes use a closed cell foam which is non absorbent material. With proper rinsing, the possibility of foreign material such as sand from being lodged into the cleaning material and causing damage to vehicle surfaces is virtually eliminated. These non absorbent qualities are also very helpful during the wash day as the weight of the brushes will not change during the wash day giving the side cleaners a set it and forget it process when it comes to setting the brush impingement into vehicle surfaces. The 30" Electric Side Brush is built on a stainless steel ground mounted frame and the main mechanical components being located close to the floor giving the customers a friendly open bay wash experience. The motor and gearbox are directly coupled to the drive hub and are shielded from the wash process by being housed under the arm of the side brush.
Tech Specs
| General |
|
Product Type |
Side Brush |
| |
Series |
30" Tall, Electric Drive |
| |
Manufacturer |
WashTools |
| |
|
|
| Vehicle Clearance |
| |
Maximum Height |
N/A |
| |
Maximum Width |
109.00" |
| |
|
|
| Final Installation Dimensions |
| |
Dimensions |
38.00" High x 75.00" Wide x 63.00" Length (per side), Minimum bay without wall interferences = 188.00" |
| |
Weight |
230 Lbs per side, 460 lbs total |
| |
|
|
| Materials, Construction and Finish |
| |
Structural Frame |
Stainless Steel |
| |
Legs |
Stainless Steel |
| |
Feet |
Stainless Steel |
| |
Hub |
Aluminum |
| |
Coatings or Finish |
None |
| |
Fasteners |
Stainless Steel |
| |
|
|
| Equipment Mounting Method |
| |
Foot Pads |
(2) Stainless steel fully gusseted foot pads (14.00" Wide x 18.00" Length x .38" Thick) |
| |
Bolt Configuration |
(6)-1/2" Concrete anchor locations per pad |
|
|
|
| Electrical Motor(s) |
| |
Type |
Totally Enclosed Fan Cooled (TEFC) |
| |
Quantity |
2 |
| |
Horse Power - Each Motor |
1.0 |
| |
Horse Power - Total System |
2.0 |
| |
Full Load Amps - Each Motor |
(4.0 A @ 208 VAC), (3.8 A @ 230 VAC), (1.8 A @ 460 VAC) |
| |
Full Load Amps - Total System |
(8.0 A @ 208 VAC), (7.6 A @ 230 VAC), (3.6 A @ 460 VAC) |
| |
Voltage |
Three phase, 208/230/480 VAC @ 60 Hz |
| |
Environment Rating |
IP 44 - Motor is protected from debris and from water splashing onto it from any direction |
| |
Electrical Certifications |
TBD |
| |
Efficiency Rating |
72% |
|
Electrical Box |
Frame mounted polycarbonate junction box pre-wired to motor electrical box |
| |
Electrical Entry |
Conduit entry hole to be drilled by installer |
| |
Wiring Connections |
9 lead motor pre-wired with 3 conductor w/ ground into junction box for high voltage (460 VAC) |
| |
Grounding |
Ground stud in electrical box for connecting ground wire pre-wired into junction box |
| |
Finish |
Painted carbon steel |
| |
|
|
| Gearbox |
|
Type |
Right angle worm gear speed reducing |
| |
Reduction Ratio |
19:1 |
| |
Finish |
Aluminum |
| |
|
|
| Bearings |
|
Type |
(2) - Pillow Block & (1) Flange |
| |
Finish |
Pillow Block - Zinc Coated, Flange - Zinc Coated |
| |
Grease Fittings |
Pillow Block - Yes, Flange - Yes |
| |
|
|
| Cleaning Material |
| |
Type |
Kirikian, Neoglide, Closed Cell Foam |
| |
Color |
Red, Blue or Black |
| |
Thickness |
.125" |
| |
Quantity |
120 strips total to touch the vehicle - See Material Tab for details |
| |
Finger Cuts |
3120 fingers total - See Material Tab for details |
| |
Alignment to Vehicle |
Width of strip is perpendicular to the vehicle travel |
| |
Connection to Equipment |
Material slides into a c-channel in the core from the top down |
|
Floor Distance |
8" to brush bottom, 38" to brush top |
| |
Overall Diameter |
48" - See Material Tab for details |
| |
Core Diameter |
10" |
| |
|
|
| Applicator Details |
| |
Manifold Material |
Stainless steel |
|
Nozzle Type |
(2) brass 8020 nozzles per side, (4) nozzles total |
| |
Application Flow |
4 GPM @ 40 PSI per side, 8 GPM @ 40 PSI total |
| |
|
|
| Controller Output Requirements |
| |
Standard |
|
| |
Number 1 |
Driver side on |
| |
Number 2 |
Passenger side on |
| |
Optional |
|
| |
Number 3 |
Solution delivery on |
| |
Number 4 |
Retract (requires retract kit SB-3601) |
| |
|
|
| Warranty |
| |
Manufacturer |
WashTools standard limited warranty |
| |
|
|
| Shipping |
| |
Parcel # |
Quantity - Description - Dimensions - Weight (each) |
| |
Parcel #1 |
(1) - Low Sides - 44.00" High x 42.00" Wide x 48.00" Length - 380 Lbs |
| |
Parcel #2 |
(2) - Side Brush Material - 22.00" High x 24.50" Wide x 24.50" Length - 40 Lbs |
| |
|
|
Included
Items Included
- Stainless steel structure and all hardware needed to assemble
- Assembled motor, gearbox and side brush arm assemblies
- Rinse manifold and nozzles
- Side brush cleaning material
- Service Pack documentation
Items NOT Included
- Floor anchors and shims
- Motor starter(s) and over current protection
- Electrical disconnect(s)
- Low pressure hose
- Polytube
- Wash solutions (chemicals)
- Solution delivery system
- High voltage wires
Installation
The installation of the side brush system is straight forward. The Service Pack documents that are provided with the product shipment include complete installation and startup instructions.
| General |
| |
People Required |
2 people capable of lifting heavy equipment |
| |
Mechanical Skill Level |
Basic - Mounting equipment and installation of cleaning material |
| |
Electrical Skill Level |
Advanced - Three phase power and knowledge of local codes is required |
| |
Pneumatic Skill Level |
Basic - Installation of filter and regulator |
| |
Fluid Skill Level |
Basic - A fluid delivery system is needed to feed the side brush for material rinse and/or lubricity |
| |
Chemical Knowledge |
Basic - Lubricity solutions may be used with the side brushes |
| |
|
|
| Tools and Equipment Needed |
| |
Unpacking |
Normal hand tools |
| |
Erection |
Lifting device (pallet jack or dolly cart) would be helpful. Measuring tools needed for positioning and hammer drill for floor anchors. |
| |
Assembly |
Normal hand tools |
| |
Wiring |
Normal electrical wiring tools |
| |
Startup |
Electrical meter helpful but not required |
| |
|
|
| Estimated Timeline |
|
Detail |
This is the time estimate for installation of the drivers side and passenger side brush only. This does not include any electrical panels, controller wiring or other equipment or systems. |
|
Unpacking |
30 minutes |
|
Preparation Assembly |
1 hour |
|
Frame Erection |
2 hours |
| |
Motor Wiring |
1 hour |
| |
Fluid Connections |
1 hour |
| |
Startup & adjustment |
1 hour |
| |
|
|
| Pneumatic Utility Connections |
|
Flow and Pressure |
.1 CFM @ 60 PSI (1 CFM @ 60 SPI with retract kit SB-3601) |
|
Incoming Connection Type and Size |
1/4" tube fitting |
|
Filter & Regulator Included |
Yes |
|
Lubricator Included |
Yes |
| |
Outgoing Connection Type and Size |
1/4" Polytube |
| |
Air Pressure Control |
Included regulator |
| |
|
|
| Equipment Connections |
|
Liquid Lines |
|
|
Incoming Connection Type and Size |
1/2" hose barbs |
|
Incoming Flow and Pressure |
4 GPM @ 40 PSI per side, 8 GPM total |
| |
Air Lines |
|
| |
Incoming Connection Type and Size |
1/4" tube fittings (1 per side) |
| |
Incoming Flow and Pressure |
.1 CFM @ 60 PSI (1 CFM @ 60 SPI with retract kit SB-3601) |
| |
|
|
All efforts are made to keep these details current but all prices, specifications, availability and terms are subject to change without notice. Taxes, fees, shipping and handling charges are extra and may vary. Valid for United States online purchases through the WashTools site only. WashTools cannot be responsible for pricing or other errors, and reserves the right to cancel orders arising from such errors.
WashTools: SB-2310 Rev 01, JS/ST
|
|
|