|
|
Sensing System, Amplifier Throughbeam Photoeye
|
Quick Ship- YES
Model: SS-1303
|
|
Overview
Features
- Wash down grade photo eyes for use in the wash bay or outdoors
- Separate amplifier box privides a set of dry NO or NC contacts
Overview
The WashTools Amplifier Throughbeam Photoeye is a set of photoeyes with housings that have a separate amplifier box inside the equipment room. One eye has a 4" stand and the other has a 36" stand that are floor mounted. Each eye has 49' attached lead wires that terminate into an amplifier box. Common applications for this set of eyes include the measure eye, vehicle presence eye, bug prep applications and door eyes.
Tech Specs
| General |
|
Product Type |
Sensing System |
| |
Series |
Amplifier Throughbeam Photoeye |
| |
Manufacturer |
WashTools |
| |
|
|
| Final Installation Dimensions |
| |
Dimensions |
4.00" High x 2.00" Wide x 4.00" Length - Eye #1, 36.00" High x 2.00" Wide x 4.00" Length - Eye #2, 7.00" High x 5.00" Wide x 4.00" Depth - Amplifier |
| |
Weight |
Eyes - 2 Lbs & 9 Lbs, Amplifier - 3 Lbs |
| |
|
|
| Materials, Construction and Finish |
| |
Structural Frame |
Stainless steel |
| |
Fasteners |
Stainless Steel |
| |
|
|
| Equipment Mounting Method |
| |
Mount Holes |
(4) 1/4" mount holes - Amplifier |
| |
Foot Pads |
(1) Stainless steel foot pad per eye (2.00" Wide x 4.00" Length x .13" Thick) |
| |
Bolt Configuration |
(2)-3/8" Concrete anchor locations per pad |
|
|
|
| Warranty |
| |
Manufacturer |
WashTools standard limited warranty |
| |
|
|
| Shipping |
| |
Parcel # |
Quantity - Description - Dimensions - Weight (each) |
| |
Parcel #1 |
(1) - Complete Photoeye Kit - 8.00" High x 8.00" Wide x 37.00" Length - 15 Lbs |
| |
|
|
Included
Items Included
- (2) Photoeyes (1 emitter and 1 receiver)
- (2) Sets of mounting brackets
- (1) Amplifier box
- Service Pack documentation
Items NOT Included
- Floor anchors and shims
- Wall anchors
- Low voltage wires
Installation
The installation of the Photoeye system is straight forward. The Service Pack documents that are provided with the product shipment include complete installation and startup instructions.
| General |
| |
People Required |
1 Person |
| |
Mechanical Skill Level |
Basic - Mounting equipment |
| |
Electrical Skill Level |
Basic - Low voltage wiring and knowledge of local codes is required |
| |
Pneumatic Skill Level |
NA |
| |
Fluid Skill Level |
NA |
| |
Chemical Knowledge |
NA |
| |
|
|
| Tools and Equipment Needed |
| |
Unpacking |
Normal hand tools |
| |
Erection |
Measuring tools needed for positioning and hammer drill for anchors. |
| |
Assembly |
Normal hand tools |
| |
Wiring |
Normal electrical wiring tools |
| |
Startup |
Electrical meter helpful but not required |
| |
|
|
| Estimated Timeline |
|
Detail |
This is the time estimate for installation of the photoeye system only. This does not include any electrical panels, controller wiring or other equipment or systems. |
|
Unpacking |
30 minutes |
|
Preparation Assembly |
30 minutes |
|
Frame Erection |
45 minutes |
| |
Wiring |
45 minutes |
| |
Startup & adjustment |
30 minutes |
| |
|
|
| Electrical Utility Connections |
|
Amplifier Power Requirements |
5 VA @ 24 VAC |
|
Sensor Power Connection Type |
(2) lead wires |
| |
|
|
| Equipment Connections |
| |
Electric Lines |
|
| |
Incoming Connection Type and Size |
Low voltage 2 conductor into amplifier box (see local codes for wire size) |
| |
Outgoing Connection Type and Size |
Low voltage 2 conductor per eye (4 total) (see local codes for wire size) |
| |
|
|
All efforts are made to keep these details current but all prices, specifications, availability and terms are subject to change without notice. Taxes, fees, shipping and handling charges are extra and may vary. Valid for United States online purchases through the WashTools site only. WashTools cannot be responsible for pricing or other errors, and reserves the right to cancel orders arising from such errors.
WashTools: SS-1303 Rev 01, JS/ST
|
|
|