|
|
Sensing System, Self Contained Throughbeam Photoeye
Price: Starting at $595.00
Options
| |
|
|
Overview
Features
- Wash down grade photo eyes for use in the wash bay or outdoors
- Alignment sensor build into the receiver eye to assist with alignment and adjustment of the photo eyes
- Fully enclosed housing to protect the eye from debris collecting on the eye surface
- Heating element maintains the area around the eye between 55 F and 65 F to prevent condensation and ice building on the eye surface. (SS-1307 Only)
Overview
The WashTools Self Contained Photo Sensing System are a set of photoeyes with housings that have self contained amplifiers and do not require a separate amplifier box inside the equipment room to operate. Each housing contains a frame with mounting pads, cover and a photo eye with 30' attached lead wires. The SS-1307 unit also includes a heating element to eliminate condensation and ice buildup on the eye surfaces in heavy misting and/or cold wash environments. The sensor set operates on a through beam principal where an output signal is activated if the sensor beam is broken when a vehicle passes between the two sensors. Alignment signals are built into the eye to assist with the alignment process.
Tech Specs
| General |
|
Product Type |
Sensing System |
| |
Series |
Self Contained Throughbeam Photoeye |
| |
Manufacturer |
WashTools |
| |
|
|
| Final Installation Dimensions |
| |
Dimensions |
5.00" High x 7.50" Wide x 4.50" Length (per eye) |
| |
Weight |
4 Lbs (per eye) |
| |
|
|
| Materials, Construction and Finish |
| |
Structural Frame |
Stainless steel |
| |
Cover |
Plastic, Paintable |
| |
Fasteners |
Stainless Steel |
| |
|
|
| Equipment Mounting Method |
| |
Foot Pads |
(1) Stainless steel foot pad per eye (7.00" Wide x 14.00" Length x .19" Thick) |
| |
Bolt Configuration |
(2)-3/8" Concrete anchor locations per pad |
|
|
|
| Warranty |
| |
Manufacturer |
WashTools standard limited warranty |
| |
|
|
| Shipping |
| |
Parcel # |
Quantity - Description - Dimensions - Weight (each) |
| |
Parcel #1 |
(1) - Complete Photoeye Kit - 5.00" High x 10.00" Wide x 13.00" Length - 9 Lbs |
| |
|
|
Included
Items Included
- (2) Photoeyes (1 emitter and 1 receiver)
- (2) Sets of housings and mounting brackets
- (2) Sets of heating elements and controls (SS-1307 Only)
- Service Pack documentation
Items NOT Included
- Floor anchors and shims
- Wall anchors
- Low voltage wires
Installation
The installation of the Photoeye system is straight forward. The Service Pack documents that are provided with the product shipment include complete installation and startup instructions.
| General |
| |
People Required |
1 Person |
| |
Mechanical Skill Level |
Basic - Mounting equipment |
| |
Electrical Skill Level |
Basid - Low voltage wiring and knowledge of local codes is required |
| |
Pneumatic Skill Level |
NA |
| |
Fluid Skill Level |
NA |
| |
Chemical Knowledge |
NA |
| |
|
|
| Tools and Equipment Needed |
| |
Unpacking |
Normal hand tools |
| |
Erection |
Measuring tools needed for positioning and hammer drill for anchors. |
| |
Assembly |
Normal hand tools |
| |
Wiring |
Normal electrical wiring tools |
| |
Startup |
Electrical meter helpful but not required |
| |
|
|
| Estimated Timeline |
|
Detail |
This is the time estimate for installation of the photoeye system only. This does not include any electrical panels, controller wiring or other equipment or systems. |
|
Unpacking |
10 minutes |
|
Preparation Assembly |
30 minutes |
|
Frame Erection |
30 minutes |
| |
Wiring |
30 minutes |
| |
Startup & adjustment |
30 minutes |
| |
|
|
| Electrical Utility Connections |
|
Sensor Power Requirements |
45 mA @ 10-30 VDC |
|
Sensor Power Connection Type |
(2) lead wires per photoeye |
|
Sensor Heat Power Requirements |
40 VA @ 24 VAC (SS-1307 Only) |
|
Sensor Heat Power Connection Type |
(2) lead wires per photoeye heating element (SS-1307 Only) |
| |
|
|
| Equipment Connections |
| |
Electric Lines |
|
| |
Incoming Connection Type and Size |
SS-1305 - Low voltage 2 conductor per eye, SS-1307 - Low voltage 4 conductor per eye (see local codes for wire size) |
| |
Outgoing Connection Type and Size |
Low voltage 1 conductor receiver eye (see local codes for wire size) |
| |
|
|
All efforts are made to keep these details current but all prices, specifications, availability and terms are subject to change without notice. Taxes, fees, shipping and handling charges are extra and may vary. Valid for United States online purchases through the WashTools site only. WashTools cannot be responsible for pricing or other errors, and reserves the right to cancel orders arising from such errors.
WashTools: SS-1305 Rev 01, JS/ST
|
|
|