|
|
Pump Module, High Pressure, Stackable, 22GPM @ 650PSI
Options
| |
|
|
Overview
Features
- General CW-81 plunger pump and motor combination generates 22 GPM @ 650 PSI
- Stackable pump design allows for multiple pumps to be easily stacked to conserve floor space in an equipment room
- Direct feed or tank feed kits allows for multiple water utility connection options
- Adjustable pressure relief valve and pressure gauge allows the operator to easily set and monitor the pressure for the wash bay equipment
Overview
The WashTools High Pressure Pump Module accommodates all of your high pressure equipment needs. Capable of operating high pressure front, back, top and side cleaning; these pump units can be used with any new or existing wash equipment. Assembled on a powder coated frame, the pump and motor combination can deliver water at pressures up to 650 PSI. A v-belt drive system has simple locking belt tension mechanism and guarding to protect technicians in the equipment room. An included adjustable pressure valve and pressure gauge make for easy final equipment adjustment and monitoring.
Tech Specs
| General |
|
Product Type |
Pump Module |
| |
Series |
High Pressure |
| |
Manufacturer |
WashTools |
| |
|
|
| Final Installation Dimensions |
| |
Dimensions |
35.21" High x 31.00" Wide x 44.50" Length |
| |
Weight |
500 Lbs |
| |
|
|
| Materials, Construction and Finish |
| |
Structural Frame |
Carbon steel - Powder coated |
| |
Legs |
Carbon steel - Powder coated |
| |
Feet |
Carbon steel - Powder coated |
| |
Fasteners |
Stainless steel |
| |
|
|
| Equipment Mounting Method |
| |
Foot Pads |
(4) Carbon steel foot pads per frame |
| |
Bolt Configuration |
(1)-1/2" Concrete anchor locations per pad. Optional vibration foot mount kit available (PM-9300) |
|
|
|
| Electrical Motor(s) |
| |
Type |
Drip Proof |
| |
Quantity |
1 |
| |
Horse Power - Each Motor |
10 |
| |
Horse Power - Total System |
10 |
| |
Full Load Amps - Each Motor |
(27.3 A @ 208 VAC), (25.4 A @ 230 VAC), (12.7 A @ 460 VAC) |
| |
Full Load Amps - Total System |
(27.3 A @ 208 VAC), (25.4 A @ 230 VAC), (12.7 A @ 460 VAC) |
| |
Voltage |
Three phase, 208/230/480 VAC @ 60 Hz |
| |
Service Factor |
1.15 |
| |
Environment Rating |
TBD |
| |
Electrical Certifications |
TBD |
| |
Efficiency Rating |
87.5% |
|
Electrical Box |
Side mounted with removable cover |
| |
Electrical Entry |
Conduit entry hole |
| |
Wiring Connections |
9 wire leads |
| |
Grounding |
Ground stud in electrical box for connecting ground wire |
| |
Finish |
Painted |
| |
|
|
| Pump Info |
|
Type |
General CW-81 |
| |
Max Pressure |
650 PSI |
| |
Max Flow |
22 GPM |
| |
Max Inlet Temperature |
165 F |
| |
Finish |
Painted aluminum and brass |
| |
Over Temperature Protection |
None |
| |
Filter |
None |
| |
Water Pressure Control |
Adjustable pressure relief valve |
| |
Water Pressure Gauge |
Glycol filled; 0 to 2000 PSI |
| |
|
|
| Belt |
|
Type |
(2) Rubber v-belts |
| |
|
|
| Controller Output Requirements |
| |
Standard |
|
| |
None |
|
| |
Optional |
|
| |
Number 1 |
Pump on |
| |
|
|
| Warranty |
| |
Manufacturer |
WashTools standard limited warranty |
| |
|
|
| Shipping |
| |
Parcel # |
Quantity - Description - Dimensions - Weight (each) |
| |
Parcel #1 |
(1) - Pump Assembly - 45.50" High x 31.00" Wide x 44.50" Length - 530 Lbs |
| |
|
|
Included
Items Included
- Pump motor and pump assembly
- Drive belt(s) and guard
- Adjustable pressure valve and gauge
- Service Pack documentation
Items NOT Included
- Requires - (1) Direct Feed Kit (PM-7110) or Tank Feed Inlet Kit (PM-9300)
- Floor anchors and shims
- Motor starter(s) and over current protection
- Electrical disconnect(s)
- Upstream ball valve
- Upstream check valve
- High pressure hose
- Low pressure hose
- High voltage wires
- Low voltage wires
- Direct Feed or Tank Feed Inlet Kit
Installation
The installation of the High Pressure Pump system is straight forward. The Service Pack documents that are provided with the product shipment include complete installation and startup instructions.
| General |
| |
People Required |
1-2 |
| |
Mechanical Skill Level |
Basic - Setting of equipment |
| |
Electrical Skill Level |
Advanced - Three phase power and knowledge of local codes is required |
| |
Pneumatic Skill Level |
NA |
| |
Fluid Skill Level |
Advanced - Plumbing of inlet feed kit and high pressure outlet |
| |
Chemical Knowledge |
NA |
| |
|
|
| Tools and Equipment Needed |
| |
Unpacking |
Normal hand tools |
| |
Erection |
Lifting device (pallet jack or dolly cart) required, a forklift would be helpful. Measuring tools needed for positioning and hammer drill for floor anchors. |
| |
Assembly |
Normal hand tools |
| |
Wiring |
Normal electrical wiring tools |
| |
Startup |
Electrical meter helpful but not required |
| |
|
|
| Estimated Timeline |
|
Detail |
This is the time estimate for installation of the High Pressure Pump system only. This does not include any electrical panels, controller wiring or other equipment or systems. |
|
Unpacking |
30 minutes |
|
Preparation Assembly |
1 hour |
| |
Frame Positioning |
1 hour |
| |
Motor Wiring |
1 hour |
| |
Fluid Connections |
1 1/2 hours |
| |
Startup & adjustment |
1 hour |
| |
|
|
| Electrical Utility Connections |
|
Pump Power Requirements |
(27.3 A @ 208 VAC), (25.4 A @ 230 VAC), (12.7 A @ 460 VAC) |
|
Pump Power Connection Type |
9 wire leads with grounding lug |
| |
|
|
| Equipment Connections |
|
Liquid Lines |
|
|
Incoming Connection Type and Size |
(1) - 1 1/2" hose barb - See Feed Kit |
|
Incoming Flow and Pressure |
22GPM @ 40 PSI - See Feed Kit |
|
Outgoing Connection Type and Size |
3/4" NPT |
| |
Electric Lines |
|
| |
Incoming Connection Type and Size |
High Voltage 3 Conductor + Ground (see local codes for wire size) |
| |
|
|
All efforts are made to keep these details current but all prices, specifications, availability and terms are subject to change without notice. Taxes, fees, shipping and handling charges are extra and may vary. Valid for United States online purchases through the WashTools site only. WashTools cannot be responsible for pricing or other errors, and reserves the right to cancel orders arising from such errors.
WashTools: PM-2260 Rev 01, JS/ST
|
|
|