|
|
Mini Mitter, Side to Side
Options
| |
|
|
Overview
Features
- Great side to side cleaning action utilizing a simplified linkage with an electric motor and gearbox
- Stainless steel frame construction, linkages, and fasteners
- Wet environment TEFC motor eliminates hydraulic drive system inefficiencies and leak potential onto vehicle and cleaning material
- Ideal for tight tunnels with limited length available for components - Less that 24" of length required
- Fluid manifold to provide lubrication and rinsing for cleaning material
Overview
The WashTools Mini-Mitter has been a proven cleaning performer for over 15 years. The small tunnel footprint enables it to be installed in a tunnel where "a little help" is needed. High quality materials and construction coupled with a simple and effective operation makes sure that this is a long-term cleaning powerhouse. With multiple soft cloth colors available it is sure to complement your existing equipment line-up.
Tech Specs
| General |
|
Product Type |
Side to Side Mitter |
| |
Series |
Cleaning Mitter |
| |
Manufacturer |
WashTools |
| |
|
|
| Vehicle Clearance |
| |
Maximum Height |
90.00" |
| |
Maximum Width |
135.58" |
| |
|
|
| Final Installation Dimensions |
| |
Dimensions |
119.37" High x 154.58" Wide x 18.81" Length |
| |
Weight |
TBD Lbs |
| |
|
|
| Materials, Construction and Finish |
| |
Structural Frame |
Stainless steel |
| |
Legs |
Stainless steel |
| |
Feet |
Stainless steel |
| |
Coatings or Finish |
None |
| |
Fasteners |
Stainless steel |
| |
|
|
| Equipment Mounting Method |
| |
Foot Pads |
(2) Stainless steel fully gusseted foot pads (15.00" square x .25" thick) |
| |
Bolt Configuration |
(8)-1/2" Concrete anchor locations per pad |
|
|
|
| Electrical Motor |
| |
Type |
Totally Enclosed Fan Cooled (TEFC) |
| |
Quantity |
1 |
| |
Horse Power - Each Motor |
.5 |
| |
Horse Power - Total System |
.5 |
| |
Full Load Amps - Each Motor |
(2.1 A @ 208 VAC), (2.1 A @ 230 VAC), (1.0 A @ 460 VAC) |
| |
Full Load Amps - Total System |
(2.1 A @ 208 VAC), (2.1 A @ 230 VAC), (1.0 A @ 460 VAC) |
| |
Voltage |
Three phase, 208/230/480 VAC @ 60 Hz |
| |
Environment Rating |
TBD |
| |
Electrical Certifications |
TBD |
| |
Efficiency Rating |
70% |
|
Electrical Box |
Side mounted with removable cover |
| |
Electrical Entry |
Threaded conduit entry hole |
| |
Wiring Connections |
9 lead motor |
| |
Grounding |
Ground stud in electrical box for connecting ground wire |
| |
Finish |
Epoxy paint |
| |
|
|
| Gearbox |
|
Type |
Right angle worm gear speed reducing |
| |
Reduction Ratio |
40:1 |
| |
Finish |
Epoxy painted steel |
| |
|
|
| Bearings |
|
Type |
(8)-Pillow Block & (2) Hanger |
| |
Finish |
Pillow Block - Zinc Coated, Hanger - Zinc Coated |
| |
Grease Fittings |
Pillow Block - Yes, Hanger - Yes |
| |
|
|
| Cleaning Material |
| |
Type |
Erie Brush, Never Fade, Polypropylene |
| |
Color |
Red, Blue or Black |
| |
Thickness |
.105" |
| |
Quantity |
(12)-14" wide x 165" long individual strips looped over the basket (24 strips to touch the vehicle) |
| |
Finger Cuts |
(4)-3.5" wide x 55" long fingers per hanging strip |
| |
Alignment to Vehicle |
Width of strip is perpendicular to the vehicle travel |
| |
Connection to Equipment |
(2) stainless steel bolts and (1) stainless steel strap per material strip |
|
Floor Distance |
18" from the bottom of the material to the floor |
| |
|
|
| Applicator Details |
| |
Manifold Material |
1" stainless steel tube |
| |
Nozzle Type |
(4) brass 8010 nozzles |
| |
Application Flow |
4 GPM @ 40 PSI |
| |
|
|
| Controller Output Requirements |
| |
Standard |
|
| |
Number 1 |
Mitter motor on |
| |
Optional |
|
| |
Number 2 |
Solution delivery on |
| |
|
|
| Warranty |
| |
Manufacturer |
WashTools standard limited warranty |
| |
|
|
| Shipping |
| |
Parcel # |
Quantity - Description - Dimensions - Weight (each) |
| |
Parcel #1 |
(1) - Complete Mitter Assembly - 33.50" High x 38.50" Wide x 120.00" Length - XX Lbs |
| |
Parcel #2 |
(1) - Mitter Material - 14.00" High x 20.50" Wide x 24.00" Length - 37 Lbs |
| |
|
|
Included
Items Included
- Stainless steel structure and all hardware needed to assemble
- Assembled motor, gearbox, carriage and linkage assembly
- Rinse manifold and nozzles
- Mitter material, mounting brackets and hardware
- Service Pack documentation
Items NOT Included
- Floor anchors and shims
- Motor starter(s) and over current protection
- Electrical disconnect(s)
- Low pressure hose
- Wash solutions (chemicals)
- Solution delivery system
- High voltage wires
Installation
The installation of the mitter system is straight forward. The Service Pack documents that are provided with the product shipment include complete installation and startup instructions.
| General |
| |
People Required |
2 capable of lifting heavy objects |
| |
Mechanical Skill Level |
Basic - Mounting equipment and installing material |
| |
Electrical Skill Level |
Advanced - Three phase power and knowledge of local codes is required |
| |
Pneumatic Skill Level |
NA |
| |
Fluid Skill Level |
Basic - A fluid delivery system is needed to feed the mitter for material rinse and/or lubricity |
| |
Chemical Knowledge |
Basic - Lubricity solutions may be used with this mitter |
| |
|
|
| Tools and Equipment Needed |
| |
Unpacking |
Normal hand tools |
| |
Erection |
Ladders required, Forklift would be helpful, Measuring tools needed for positioning and hammer drill for floor anchors |
| |
Assembly |
Normal hand tools |
| |
Wiring |
Normal electrical wiring tools |
| |
Startup |
Electrical meter helpful but not required |
| |
|
|
| Estimated Timeline |
|
Detail |
This is the time estimate for installation of the mitter only. This does not include any electrical panels, solution delivery panels, controller wiring or other equipment or systems |
|
Unpacking |
30 minutes |
|
Preparation Assembly |
1 hour |
|
Frame Erection |
1 hour |
| |
Cloth Mounting |
1 hour |
| |
Motor Wiring |
30 minutes |
| |
Fluid Connections |
30 minutes |
| |
Startup & adjustment |
1 hour |
| |
|
|
| Equipment Connections |
|
Liquid Lines |
|
|
Incoming Connection Type and Size |
1/2" hose barb |
|
Incoming Flow and Pressure |
4 GPM @ 40 PSI |
| |
Electric Lines |
|
| |
Incoming Connection Type and Size |
High Voltage 3 Conductor + Ground (see local codes for wire size) |
| |
|
|
All efforts are made to keep these details current but all prices, specifications, availability and terms are subject to change without notice. Taxes, fees, shipping and handling charges are extra and may vary. Valid for United States online purchases through the WashTools site only. WashTools cannot be responsible for pricing or other errors, and reserves the right to cancel orders arising from such errors.
WashTools: MM-1520 Rev 02, JS/ST
|
|
|