|
|
Low Pressure Single Product Proportioning System
|
Quick Ship- YES
Model: LP-7310
|
|
Overview
Features
- Volumetric pump delivers up to 11 GPM
- Adjustable dilution ration - 500:1 to 64:1
- Adjustable pressure regulator maintains a uniform application rate
Overview
The WashTools Low Pressure Single Product Proportioning System is designed to an application arch or rinse manifold. Incoming city water pressure is fed into the unit and can be adjusted via a pressure regulator before entering a volumetric proportioning pump. A pressure gauge allows the operator to adjust the application flow rate (up to 11 GPM). An adjustable injector stem allows your product to be diluted from 500:1 to 64:1 and delivered to your arch or rinse manifold.
Tech Specs
| General |
|
Product Type |
Solution Panel |
| |
Series |
Low Pressure Single Product Proportioning System |
| |
Manufacturer |
WashTools |
| |
|
|
| Final Installation Dimensions |
| |
Dimensions |
18.00" High x 9.25" Wide x 15.50" Length |
| |
Weight |
28 Lbs |
| |
|
|
| Materials, Construction and Finish |
| |
Structural Frame |
Stainless steel |
| |
Fasteners |
Stainless steel |
| |
|
|
| Equipment Mounting Method |
| |
Mount Holes |
(2) 3/8" anchor locations per panel frame |
| |
Wall Mounted Equipment Elevation |
44.00" Above finished floor is typical |
|
|
|
| Pump Info |
|
Type |
Dosatron |
| |
Max Inlet Temperature |
104 F |
| |
Finish |
Polyproplyene |
| |
Filter |
50 Mesh - Serviceable |
| |
Water Pressure Control |
25-75 PSI - Adjustable |
| |
|
|
| Controller Output Requirements |
| |
Standard |
|
| |
Number 1 |
Pump Unit On |
| |
|
|
| Panel Details |
| |
Manifold Material |
Stainless steel |
| |
Water Pressure Gauge |
Glycol Filled |
| |
Injector Type |
Volumetric pump |
| |
Titration Ratios |
500:1 to 64:1 |
|
Application Flow |
11 GPM Max |
| |
|
|
| Warranty |
| |
Manufacturer |
WashTools standard limited warranty |
| |
|
|
| Shipping |
| |
Parcel # |
Quantity - Description - Dimensions - Weight (each) |
| |
Parcel #1 |
(1) - Pump Unit Complete - 18.00" High x 9.25" Wide x 15.50" Length - 28 Lbs |
| |
|
|
Included
Items Included
- Completely assembled frame with pump assembly and water valve
- Pickup tube with weight, strainer and check valve
- Adjustable pressure regulator and pressure gauge
- Service Pack documentation
Items NOT Included
- Wall anchors
- Upstream ball valve
- Upstream check valve
- Low pressure hose
- Wash solutions (chemicals)
- Low voltage wires
Installation
The installation of the Low Pressure Single Product Proportioning System is straight forward. The Service Pack documents that are provided with the product shipment include complete installation and startup instructions.
| General |
| |
People Required |
1 Person |
| |
Mechanical Skill Level |
Basic - Mounting equipment |
| |
Electrical Skill Level |
Basic - Low voltage power and knowledge of local codes is required |
| |
Pneumatic Skill Level |
NA |
| |
Fluid Skill Level |
Basic - Water utility connection required |
| |
Chemical Knowledge |
Advanced - Detergent titrations required |
| |
|
|
| Tools and Equipment Needed |
| |
Unpacking |
Normal hand tools |
| |
Erection |
Measuring tools needed for positioning and hammer drill for anchors. |
| |
Assembly |
Normal hand tools |
| |
Wiring |
Normal electrical wiring tools |
| |
Startup |
Electrical meter helpful but not required |
| |
|
|
| Estimated Timeline |
|
Detail |
This is the time estimate for installation of the proportioning system only. This does not include any electrical panels, controller wiring or other equipment or systems. |
|
Unpacking |
15 minutes |
|
Preparation Assembly |
30 minutes |
|
Frame Erection |
30 minutes |
| |
Wiring |
30 minutes |
| |
Fluid Connections |
1 hour |
| |
Startup & adjustment |
1 hour |
| |
|
|
| Electrical Utility Connections |
|
Pump Power Requirements |
15 A @ 24 VAC |
|
Pump Power Connection Type |
2 lead wires |
| |
|
|
| Water Utility Connections |
|
Flow and Pressure |
11 GPM @ 40-80 PSI |
|
Incoming Connection Type and Size |
1/2" Hose barb |
|
Filter Included |
50 Mesh - Serviceable |
| |
|
|
| Equipment Connections |
|
Liquid Lines |
|
|
Outgoing Connection Type and Size |
1/2" Hose barb |
| |
|
|
All efforts are made to keep these details current but all prices, specifications, availability and terms are subject to change without notice. Taxes, fees, shipping and handling charges are extra and may vary. Valid for United States online purchases through the WashTools site only. WashTools cannot be responsible for pricing or other errors, and reserves the right to cancel orders arising from such errors.
WashTools: LP-7310 Rev 01, JS/ST
|
|
|