|
|
Hydraulic Unit, Individual Control, 5.0GPM / 3.0HP
|
Quick Ship- NO (estimated 4 weeks)
Options
| |
|
|
Overview
Features
- 20 gallon reservoir with sight glass and temperature gauge
- Serviceable in-line return filter with filter replacement gauge
- Pressure-compensated flow control with a pressure gauge and pressure relief valve
- High quality vane pump
- Hydraulic fluid over-temp and low level sensors
Overview
The WashTools 5.0 GPM Hydraulic Unit is designed to feed equipment requiring hydraulic power with up to 5.0 gallons per minute at 800 PSI. Applications for this unit are hydraulic drive conveyors.
Tech Specs
| General |
|
Product Type |
Hydraulic Unit |
| |
Series |
5.0 GPM |
| |
Manufacturer |
WashTools |
| |
|
|
| Final Installation Dimensions |
| |
Dimensions |
24.50" High x 20.60" Wide x 26.25" Length |
| |
Weight |
115 Lbs |
| |
|
|
| Materials, Construction and Finish |
| |
Structural Frame |
Carbon Steel - Painted |
| |
|
|
| Equipment Mounting Method |
| |
Foot Pad |
(1) Painted carbon steel foot pad |
| |
Bolt Configuration |
(4) 3/8" concrete anchor locations per pad |
|
|
|
| Electrical Motor(s) |
| |
Type |
TEFC |
| |
Quantity |
1 |
| |
Horse Power - Each Motor |
3 |
| |
Horse Power - Total System |
3 |
| |
Full Load Amps - Each Motor |
(8.5 A @ 208 VAC), (7.7 A @ 230 VAC), (3.9 A @ 460 VAC) |
| |
Full Load Amps - Total System |
(8.5 A @ 208 VAC), (7.7 A @ 230 VAC), (3.9 A @ 460 VAC) |
| |
Voltage |
Three phase, 208/230/460 VAC @ 60 Hz |
| |
Service Factor |
1.15 |
| |
Environment Rating |
TBD |
| |
Electrical Certifications |
TBD |
| |
Efficiency Rating |
77% |
|
Electrical Box |
Side mounted with removable cover |
| |
Electrical Entry |
Conduit entry hole |
| |
Wiring Connections |
6 lead motor |
| |
Grounding |
Ground stud in electrical box for connecting ground wire |
| |
Finish |
Painted |
| |
|
|
| Controller Output Requirements |
| |
Standard |
|
| |
Number 1 |
Power Pack On |
| |
|
|
| Warranty |
| |
Manufacturer |
WashTools standard limited warranty |
| |
|
|
| Shipping |
| |
Parcel # |
Quantity - Description - Dimensions - Weight (each) |
| |
Parcel #1 |
(1) - Complete pump unit - 24.50" High x 20.60" Wide x 26.25" Length - 115 Lbs |
| |
|
|
Included
Items Included
- Completely assembled motor, pump and tank
- Sight and temperature gauge
- In-line filter
- Flow control with pressure gauge
- Pressure relief valve
- Hydraulic fluid over-temp and low level sensors
- Service Pack documentation
Items NOT Included
- Floor anchors and shims
- Motor starter(s) and over current protection
- Electrical disconnect(s)
- High pressure hose
- Hydraulic fluid
- High voltage wires
Installation
The installation of the Hydraulic Unit is straight forward. The Service Pack documents that are provided with the product shipment include complete installation and startup instructions.
| General |
| |
People Required |
1-2 people |
| |
Mechanical Skill Level |
Basic |
| |
Electrical Skill Level |
Advanced - Three phase power and knowledge of local codes is required |
| |
Pneumatic Skill Level |
NA |
| |
Fluid Skill Level |
Basic - Hydraulic connections required |
| |
Chemical Knowledge |
NA |
| |
|
|
| Tools and Equipment Needed |
| |
Unpacking |
Normal hand tools |
| |
Erection |
Measuring tools needed for positioning and hammer drill for floor anchors. |
| |
Assembly |
Normal hand tools |
| |
Wiring |
Normal electrical wiring tools |
| |
Startup |
Electrical meter helpful but not required |
| |
|
|
| Estimated Timeline |
|
Detail |
This is the time estimate for installation of the hydraulic unit only. This does not include any electrical panels, controller wiring or other equipment or systems. |
|
Unpacking |
30 minutes |
|
Preparation Assembly |
30 minutes |
|
Frame Erection |
1 hour |
| |
Motor Wiring |
1 hour |
| |
Fluid Connections |
1 hour |
| |
Startup & adjustment |
1 hour |
| |
|
|
| Electrical Utility Connections |
|
Pump Power Requirements |
(8.5 A @ 208 VAC), (7.7 A @ 230 VAC), (3.9 A @ 460 VAC) |
|
Pump Power Connection Type |
6 wire leads with grounding lug |
| |
|
|
| Hydraulic Utility Connections |
|
Flow and Pressure |
5.0 GPM @ 800 PSI |
|
Incoming Connection Type and Size |
1/2" NPT |
| |
Outgoing Connection Type and Size |
1/2" NPT |
| |
|
|
| Equipment Connections |
| |
Electric Lines |
|
| |
Incoming Connection Type and Size |
High Voltage 3 Conductor + Ground & Low Voltage 3 Conductor (see local codes for wire size) |
| |
|
|
All efforts are made to keep these details current but all prices, specifications, availability and terms are subject to change without notice. Taxes, fees, shipping and handling charges are extra and may vary. Valid for United States online purchases through the WashTools site only. WashTools cannot be responsible for pricing or other errors, and reserves the right to cancel orders arising from such errors.
WashTools: HU-8050 Rev 01, JS/ST
|
|
|