|
|
Combo Cleaner, HP Top Cleaners on Arch
|
Quick Ship- YES
Model: CC-1490
|
|
Overview
Features
- Zero degree nozzles coupled with an oscillating stainless steel frame and manifolds ensure long service life and minimal equipment maintenance
- Small footprint allows the side cleaners to be mounted into tight spaces in between existing wash components where additional cleaning is needed
- Hydraulic motor and linkage assembly ensures smooth sweeping motion of spray manifold
Overview
The WashTools High Pressure Top Cleaner is designed to province optimal cleaning to the tops of vehicles. A single manifold houses (10) 0-degree nozzles and utilizes a hydraulically driven motor to provide a sweeping action across the vehicle surface. As a vehicle approaches a top flip cylinder will angle this manifold to maintain 90 degree angle to the windshield to maximize cleaning effectiveness. Half way thru this high pressure pass the top cylinder with then position the manifold to a 90 degree angle to the back windshield of the vehicle. The 0-degree nozzle assembly provides excellent cleaning coverage from low profile vehicles to large trucks.
Tech Specs
| General |
|
Product Type |
Combo Cleaner |
| |
Series |
High Pressure Top Cleaner |
| |
Manufacturer |
WashTools |
| |
|
|
| Vehicle Clearance |
| |
Maximum Height |
90" |
| |
Maximum Width |
133.92" |
| |
|
|
| Final Installation Dimensions |
| |
Dimensions |
108.0" High x 144.00" Wide x 26.75." Length |
| |
Weight |
TBD Lbs |
| |
|
|
| Materials, Construction and Finish |
| |
Structural Frame |
Stainless Steel |
| |
Legs |
Stainless Steel |
| |
Feet |
Stainless Steel |
| |
Fasteners |
Stainless Steel |
| |
|
|
| Equipment Mounting Method |
| |
Foot Pads |
(2) Stainless steel foot pads (7.00" Wide x 14.00" Length x .19" Thick) |
| |
Bolt Configuration |
(8)-1/2" Concrete anchor locations per pad |
| |
|
|
| Bearings |
|
Type |
(2)-Pillow Block, (2)-Pivot |
| |
Finish |
Pillow Block - Composite, Pivot - Nylon |
| |
Grease Fittings |
Pillow Block - No, Pivot - No |
| |
|
|
| Hydraulic Motor(s) |
| |
Quantity |
1 |
| |
Displacement |
1.93 cu in |
| |
Finish |
Painted |
|
|
|
| Applicator Details |
| |
Manifold Material |
1" stainless steel tube |
| |
Nozzle Type |
Main Manifold - (10) stainless steel 0004 nozzles |
| |
Application Flow |
20 GPM @ 1000 PSI |
| |
|
|
| Controller Output Requirements |
| |
Standard |
|
| |
Number 1 |
Flip Valve On (open) |
| |
Optional |
|
|
Number 2 |
High Pressure Pump On |
| |
Number 3 |
Hydraulic Pump On |
| |
|
|
| Warranty |
| |
Manufacturer |
WashTools standard limited warranty |
| |
|
|
| Shipping |
| |
Parcel # |
Quantity - Description - Dimensions - Weight (each) |
| |
Parcel #1 |
(X) - Description - XX" High x XX" Wide x XX" Length - XX Lbs |
| |
Parcel #2 |
(X) - Description - XX" High x XX" Wide x XX" Length - XX Lbs |
| |
Parcel #3 |
(X) - Description - XX" High x XX" Wide x XX" Length - XX Lbs |
| |
Parcel #4 |
(X) - Description - XX" High x XX" Wide x XX" Length - XX Lbs |
| |
|
|
Included
Items Included
- (2) Stainless steel frame legs
- (2) Stainless steel top frame sections
- Top manifold assemble with hydraulic drive, linkage and guard
- Top flip cylinder assembly
- Stainless steel 0-degree nozzles
- Air valve and Regulator
- Service Pack documentation
Items NOT Included
- Floor anchors and shims
- High pressure hose
- Polytube
Installation
The installation of the High Pressure Top Cleaner system is straight forward. The Service Pack documents that are provided with the product shipment include complete installation and startup instructions.
| General |
| |
People Required |
2 people capable of lifting heavy equipment |
| |
Mechanical Skill Level |
Basic - Mounting equipment |
| |
Electrical Skill Level |
Basic - Wiring of water and air valves |
| |
Pneumatic Skill Level |
Basic - Plumbing pneumatic valve |
| |
Fluid Skill Level |
Basic - High pressure pump and hydraulic connections required |
| |
Chemical Knowledge |
NA |
| |
|
|
| Tools and Equipment Needed |
| |
Unpacking |
Normal hand tools |
| |
Erection |
Ladders are required, a lifting device would be helpful. Measuring tools needed for positioning and hammer drill for floor anchors. |
| |
Assembly |
Normal hand tools |
| |
Wiring |
Normal electrical wiring tools |
| |
Startup |
Electrical meter helpful but not required |
| |
|
|
| Estimated Timeline |
|
Detail |
This is the time estimate for installation of the High Pressure Top Cleaner system only. This does not include any electrical panels, controller wiring or other equipment or systems. |
|
Unpacking |
30 minutes |
|
Preparation Assembly |
1 hour |
|
Frame Erection |
2 hours |
| |
Fluid Connections |
1 hour |
| |
Startup & adjustment |
1 hour |
| |
|
|
| Electrical Utility Connections |
| |
Air Valve Power Requirements |
6 VA @ 24 VAC |
| |
Air Valve Power Connection Type |
(2) lead wires per valve |
| |
|
|
| Pneumatic Utility Connections |
|
Flow and Pressure |
1 CFM @ 100 PSI |
|
Incoming Connection Type and Size |
1/4" Tube fitting |
|
Filter Included |
No |
| |
Regulator Included |
Yes |
|
Lubricator Included |
No |
| |
Outgoing Connection Type and Size |
1/4" Tube fitting |
| |
Air Pressure Control |
Yes |
|
Air Flow Control |
Yes, (2) needle valves on flip cylinder |
| |
|
|
| Equipment Connections |
|
Liquid Lines |
|
|
Incoming Connection Type and Size |
(1) - 3/4" NPT |
|
Incoming Flow and Pressure |
20 GPM @ 1000 PSI |
| |
Hydraulic Lines |
|
| |
Incoming Connection Type and Size |
(2) - 3/8" NPT |
| |
Incoming Flow and Pressure |
3 GPM @ 500 PSI |
| |
|
|
All efforts are made to keep these details current but all prices, specifications, availability and terms are subject to change without notice. Taxes, fees, shipping and handling charges are extra and may vary. Valid for United States online purchases through the WashTools site only. WashTools cannot be responsible for pricing or other errors, and reserves the right to cancel orders arising from such errors.
WashTools: CC-1490 Rev 01, JS/ST
|
|
|