|
|
Hand Applicator System
|
Quick Ship- NO (estimated 4 weeks)
Options
| |
|
|
Overview
Features
- On demand liquid product application allows wash attendants to apply solutions such as bug prep, wheel and/or tire cleaner or engine cleaner to a vehicle
- (2) wand assemblies allow for accelerated application to different areas of a vehicle simultaneously
Overview
The WashTools Hand Applicator System is a self contained liquid application system designed for attendants to apply a prep solution to a vehicle surface such as bug prep or engine cleaner. Two independent wand assemblies are fed by a pump unit which uses a Hydrominder to pre-mix the liquid. When the prep wand trigger pulled a pressure switch detects a pressure drop in the product line and activates a delivery pump to pull pre-mixed solution from the mixing tank. When the trigger is released, water flow will stop and the pressure switch will detect the pressure increase into he product line then turn the pump motor off.
Tech Specs
| General |
|
Product Type |
Detergent Application |
| |
Series |
Hand Applicator System |
| |
Manufacturer |
WashTools |
| |
|
|
| Final Installation Dimensions |
| |
Dimensions |
Pump Module - 32.00" High x 16.50" Wide x 9.00" Depth, Applicator Stands - 28.00" High x 4.00" Wide x 10.00" Length (each) |
| |
Weight |
Pump Module - 25 Lbs, Applicators - 8 Lbs (each) |
| |
|
|
| Required Bay Dimensions |
| |
Minimum Bay Height |
See Final Installation Dimension |
| |
Minimum Bay Width |
See Final Installation Dimension |
| |
Minimum Bay Length |
See Final Installation Dimension |
| |
|
|
| Materials, Construction and Finish |
| |
Structural Frame |
Stainless steel |
| |
Tank |
Stainless Steel |
| |
Fasteners |
Stainless steel |
| |
|
|
| Equipment Mounting Method |
| |
Mount Holes |
(4) 3/8" anchor locations per panel frame |
| |
Bolt Configuration |
(2) top mount holes and (2) bottom mount locations |
| |
Wall Mounted Equipment Elevation |
44.00" Above finished floor is typical |
|
|
|
| Pump Info |
|
Type |
Shurflo diaphragm pump |
| |
Valve Material |
EPDM |
| |
Diaphragm Material |
Santoprene |
| |
Max Inlet Temperature |
140 F |
| |
Finish |
Polypropylene |
| |
Filter |
80 Mesh Stainless steel - Serviceable |
| |
|
|
| Wand Details |
| |
Wand Material |
Stainless steel with rubber grip and plastic trigger |
| |
Nozzle Type |
(1)-stainless steel 2504 nozzle per wand |
| |
Application Flow |
1.4 GPM total flow |
| |
|
|
| Panel Details |
| |
Injector Type |
Hydrominder 515 |
| |
Titration Ratios |
1:1 to 100:1 Approximate ratios @ 40 PSI |
| |
Tank Capacity |
3 Gallons |
|
Application Flow |
1.4 GPM liquid product to applicators |
| |
|
|
| Warranty |
| |
Manufacturer |
WashTools standard limited warranty |
| |
|
|
| Shipping |
| |
Parcel # |
Quantity - Description - Dimensions - Weight (each) |
| |
Parcel #1 |
(X) - Description - XX" High x XX" Wide x XX" Length - XX Lbs |
| |
Parcel #2 |
(X) - Description - XX" High x XX" Wide x XX" Length - XX Lbs |
| |
Parcel #3 |
(X) - Description - XX" High x XX" Wide x XX" Length - XX Lbs |
| |
Parcel #4 |
(X) - Description - XX" High x XX" Wide x XX" Length - XX Lbs |
| |
|
|
Included
Items Included
- Hydrominder assembly
- Control box with pump
- (2) Application manifolds and floor stands
- Nozzles
- Low pressure hose
- Polytube
- Service Pack documentation
Items NOT Included
- Floor anchors and shims
- Wall anchors
- Electrical disconnect
- Upstream ball valve
- Upstream check valve
- Wash solutions (chemicals)
- Low voltage wires
Installation
The installation of the Hand Applicator System is straight forward. The Service Pack documents that are provided with the product shipment include complete installation and startup instructions.
| General |
| |
People Required |
1 person |
| |
Mechanical Skill Level |
Basic - Mounting equipment |
| |
Electrical Skill Level |
Basic - Low voltage power and knowledge of local codes is required |
| |
Pneumatic Skill Level |
N/A |
| |
Fluid Skill Level |
Basic - Pump panel water utility connection required |
| |
Chemical Knowledge |
Advanced - Detergent titrations required |
| |
|
|
| Tools and Equipment Needed |
| |
Unpacking |
Normal hand tools |
| |
Erection |
Measuring tools needed for positioning and hammer drill for anchors |
| |
Assembly |
Normal hand tools |
| |
Wiring |
Normal electrical wiring tools |
| |
Startup |
Electrical meter helpful but not required, Chemical Titration Kit |
| |
|
|
| Estimated Timeline |
|
Detail |
This is the time estimate for installation of the hand applicator system only. This does not include any electrical panels, controller wiring or other equipment or systems. |
|
Unpacking |
30 minutes |
|
Preparation Assembly |
1 hour |
|
Frame & Manifold Erection |
1 hour |
| |
Wiring |
1 hour |
| |
Fluid Connections |
2 hours |
| |
Startup & adjustment |
1 hour |
| |
|
|
| Electrical Utility Connections |
|
Pump Power Requirements |
1.2 A @ 120 VAC |
|
Pump Power Connection Type |
120 VAC Outlet with ground |
| |
|
|
| Equipment Connections |
|
Liquid Lines |
|
|
Incoming Connection Type and Size |
1/2" Hose barb |
|
Incoming Flow and Pressure |
3 GPM @ 10-70 PSI |
|
Outgoing Connection Type and Size |
3/8" Tube fitting |
| |
Electric Lines |
|
| |
Incoming Connection Type and Size |
120 VAC outlet with ground |
| |
|
|
All efforts are made to keep these details current but all prices, specifications, availability and terms are subject to change without notice. Taxes, fees, shipping and handling charges are extra and may vary. Valid for United States online purchases through the WashTools site only. WashTools cannot be responsible for pricing or other errors, and reserves the right to cancel orders arising from such errors.
WashTools: HA-2470 Rev 01, JS/ST
|
|
|