|
|
Side Blasters, High Pressure, Electric Drive, Stationary
|
Quick Ship- NO (estimated 4 weeks)
Model: SB-1200
|
|
Overview
Features
- Constructed of stainless steel and other corrosion resistant materials for long life and reliability
- Electrically driven rotating manifold Zero degree nozzles on an offset rotating manifold to produce a shaped cleaning pattern
- High pressure mechanical swivel seals allow for long service life
Overview
The WashTools High Pressure Stationary Side Blasters are a set of fully adjustable, zero degree high pressure cleaners. Designed to provide high pressure coverage to the rocker panels, front and rear quarter panels, wheels, wheel wells, headlights or outer bumper areas; the units are stationary and send a rotating blast of zero-degree nozzle water to sweep dirt off of vehicles. Adjustable mounting stands allow units to target specific areas of a vehicle.
Tech Specs
| General |
|
Product Type |
High Pressure Cleaning |
|
Series |
Stationary Side Blasters |
|
Manufacturer |
WashTools |
|
|
|
| Vehicle Clearance |
|
Maximum Height |
TBD |
|
Maximum Width |
TBD |
|
|
|
| Final Installation Dimensions |
|
Dimensions |
18.00" High x 18.75" Wide x 15.00" Length (per side) |
|
Weight |
37 Lbs (each) |
|
|
|
| Required Bay Dimensions |
|
Minimum Bay Height |
See Final Installation Dimension |
|
Minimum Bay Width |
15' |
|
Minimum Bay Length |
See Final Installation Dimension |
|
|
|
| Materials, Construction and Finish |
|
Structural Frame |
Aluminum |
|
Legs |
Aluminum |
|
Feet |
Aluminum |
|
Fasteners |
Stainless steel |
|
|
|
| Equipment Mounting Method |
|
Foot Pads |
(2) Aluminum foot pads (8.00" Round x .38" Thick) |
|
Bolt Configuration |
(4)-3/8" Concrete anchor locations per pad |
| |
|
|
| Electrical Motor(s) |
| |
Type |
Totally Enclosed Fan Cooled (TEFC) |
| |
Quantity |
1 Per Side, 2 Total |
| |
Horse Power - Each Motor |
.25 |
| |
Horse Power - Total System |
.5 |
| |
Full Load Amps - Each Motor |
(1.1 A @ 208 VAC), (1.1 A @ 230 VAC), (.7 A @ 460 VAC) |
| |
Full Load Amps - Total System |
(2.2 A @ 208 VAC), (2.2 A @ 230 VAC), (1.4 A @ 460 VAC) |
| |
Voltage |
Three phase, 208/230/460 VAC @ 60 Hz |
| |
Service Factor |
|
| |
Environment Rating |
IP 55 - Motor is protected from dust and from water splashing onto it from any direction |
| |
Electrical Certifications |
UL, cUL, CE |
| |
Efficiency Rating |
57% |
|
Electrical Box |
Side mounted with removable cover |
| |
Electrical Entry |
Threaded conduit entry hole |
| |
Wiring Connections |
9 wire leads with 6 terminals |
| |
Grounding |
Ground stud in electrical box for connecting ground wire |
| |
Finish |
Epoxy paint on cast aluminum |
| |
|
|
| Gearbox |
|
Type |
Right angle gear reducing |
| |
Reduction Ratio |
7.5:1 |
| |
Finish |
Aluminum |
| |
|
|
| Applicator Details |
|
Manifold Material |
Stainless steel |
|
Nozzle Type |
(8) 0004 stainless steel nozzles (per side), (16) nozzles total |
|
Application Flow |
11 GPM @ 650 PSI (per side), 22 GPM @ 650 PSI total |
|
|
|
| Controller Output Requirements |
|
Standard |
|
|
None |
|
|
Optional |
|
|
Number 1 |
High Pressure Pump On |
|
Number 2 |
Electric Drive On |
|
|
|
| Warranty |
|
Manufacturer |
WashTools standard limited warranty |
|
|
|
| Shipping |
|
Parcel # |
Quantity - Description - Dimensions - Weight (each) |
|
Parcel #1 |
(2) - Complete assembly - 15" High x 10" Wide x 25" Length - 38 Lbs |
|
|
|
Included
Items Included
- Stainless steel frames and Side Blaster mounting hardware
- Completely assembled motor, coupling and manifold assembly
- Stainless steel 0-degree nozzles
- Service Pack documentation
Items NOT Included
- Floor anchors and shims
- High pressure hose
- Electric motor starters
Installation
The installation of the High Pressure Stationary Side Blasters is straight forward. The Service Pack documents that are provided with the product shipment include complete installation and startup instructions.
| General |
|
People Required |
1 Person |
|
Mechanical Skill Level |
Basic - Mounting equipment |
|
Electrical Skill Level |
Advanced- Three phase motor connection needed |
|
Pneumatic Skill Level |
NA |
|
Fluid Skill Level |
Basic - High pressure pump connections required |
|
Chemical Knowledge |
NA |
|
|
|
| Tools and Equipment Needed |
|
Unpacking |
Normal hand tools |
|
Erection |
Measuring tools needed for positioning and hammer drill for floor anchors. |
|
Assembly |
Normal hand tools |
|
Wiring |
Normal electrical wiring tools |
|
Startup |
Normal hand tools |
|
|
|
| Estimated Timeline |
|
Detail |
This is the time estimate for installation of the High Pressure Stationary Side Blasters only. This does not include any electrical panels, controller wiring or other equipment or systems. |
|
Unpacking |
30 minutes |
|
Preparation Assembly |
1 hour |
|
Frame Erection |
2 hours |
|
Fluid Connections |
2 hours |
|
Startup & adjustment |
1 hour |
|
|
|
| Equipment Connections |
|
Liquid Lines |
|
|
Incoming Connection Type and Size |
1/2" NPT |
|
Incoming Flow and Pressure |
11 GPM @ 650 PSI (per side), 22 GPM @ 650 PSI total |
|
Hydraulic Lines |
|
|
Incoming Connection Type and Size |
1/2" NPT |
|
Incoming Flow and Pressure |
3 GPM @ 500 PSI |
|
Outgoing Connection Type and Size |
1/2" NPT |
|
Plumbing Configuration |
Series |
|
|
|
All efforts are made to keep these details current but all prices, specifications, availability and terms are subject to change without notice. Taxes, fees, shipping and handling charges are extra and may vary. Valid for United States online purchases through the WashTools site only. WashTools cannot be responsible for pricing or other errors, and reserves the right to cancel orders arising from such errors.
WashTools: SB-1200 Rev 03, JS/ST
|
|
|