|
|
Electric Panel for Blowers, 3 Blower, Individual Feed
Options
| |
| |
|
|
Overview
Features
- Integrated motor starters provide thermal and over current protection of electrical motors
- Adjustable trip current settings to adjust to specific motor requirements
- Lockable reset and settings panel for secure operation
- Lost phase protection to protect motors in the event that the electrical supply looses a leg of power
- Non metallic corrosion resistant enclosure can be mounted in the equipment room or in the wash bay
Overview
The WashTools Electrical Panel for Blowers is an electrical enclosure containing integrated motor starters to be used with the WashTools blower systems.
Tech Specs
| General |
|
Product Type |
Electrical Panel |
| |
Series |
(3) - 7.5 HP |
| |
Manufacturer |
WashTools |
| |
|
|
| Final Installation Dimensions |
| |
Dimensions |
15.75" High x 13.75" Wide x 7.00" Depth |
| |
Weight |
12 Lbs |
| |
|
|
| Materials, Construction and Finish |
| |
Enclosure |
Polycarbonate |
| |
|
|
| Equipment Mounting Method |
| |
Mount Holes |
(4) 3/8" anchor locations per enclosure |
| |
Bolt Configuration |
(1) top mount and (2) bottom mount locations are 15.00 on center |
|
|
|
| Panel Details |
| |
Contactor Type |
Telemecanique |
| |
Voltage |
208-240 VAC or 460-480 VAC |
| |
Current Range |
8.00 to 32.00 A @ 208-240 VAC or 460-480 VAC |
| |
Control Voltage |
24 VAC or 120 VAC |
| |
|
|
| Warranty |
| |
Manufacturer |
WashTools standard limited warranty |
| |
|
|
| Shipping |
| |
Parcel # |
Quantity - Description - Dimensions - Weight (each) |
| |
Parcel #1 |
(1) - Single Starter Box - 12.00" High x 18.00" Wide x 18.00" Length - 13 Lbs |
| |
|
|
Included
Items Included
- (1) Electrical Enclosure
- (3) Integrated self protected motor starter (contactor and overload)
- Service Pack documentation
Items NOT Included
- Wall anchors
- Electrical disconnect(s)
- High voltage wires
- Low voltage wires
Installation
The installation of the Electric Panel for Blowers is straight forward. The Service Pack documents that are provided with the product shipment include complete installation and startup instructions.
| General |
| |
People Required |
1 |
| |
Mechanical Skill Level |
Basic - Mounting of enclosure |
| |
Electrical Skill Level |
Advanced - Three phase power and knowledge of local codes is required |
| |
Pneumatic Skill Level |
NA |
| |
Fluid Skill Level |
NA |
| |
Chemical Knowledge |
NA |
| |
|
|
| Tools and Equipment Needed |
| |
Unpacking |
Normal hand tools |
| |
Erection |
Measuring tools needed for positioning and hammer drill for anchors. |
| |
Assembly |
Normal hand tools |
| |
Wiring |
Normal electrical wiring tools |
| |
Startup |
Electrical meter helpful but not required |
| |
|
|
| Estimated Timeline |
|
Detail |
This is the time estimate for installation of the starter panel only. This does not include any other equipment or systems. |
|
Unpacking |
10 minutes |
|
Preparation Assembly |
10 minutes |
|
Enclosure Mounting |
30 minutes |
| |
Wiring |
3 hours |
| |
Startup & adjustment |
30 minutes |
| |
|
|
| Electrical Utility Connections |
| |
Control Box Power Requirements |
6 VA @ 24 VAC or .28 A @ 120 VAC (per motor starter) |
| |
Control Box Power Connection Type |
(2) screw terminals |
| |
|
|
| Equipment Connections |
| |
Electric Lines |
|
| |
Incoming Connection Type and Size |
High Voltage 3 Conductor + Ground, Low voltage 2 conductor (see local codes for wire size) (per motor starter) |
| |
Outgoing Connection Type and Size |
High Voltage 3 Conductor + Ground (see local codes for wire size)(per motor starter) |
| |
|
|
All efforts are made to keep these details current but all prices, specifications, availability and terms are subject to change without notice. Taxes, fees, shipping and handling charges are extra and may vary. Valid for United States online purchases through the WashTools site only. WashTools cannot be responsible for pricing or other errors, and reserves the right to cancel orders arising from such errors.
WashTools: EP-6530 Rev 01, JS/ST
|
|
|