|
|
Rinse Arch, Flip, High Pressure
|
Quick Ship- YES
Model: RA-3720
|
|
Overview
Features
- Application flow of 15 GPM @ 1000 PSI
- Manifold flip mechanism to provide adjusted spray angles to the vehicle surface during the detergent application
- Nozzle spacing and orientation provides complete product coverage to the top and sides of vehicles
- Stainless steel frame, manifolds and nozzles provide long service life with minimal maintenance
- Multiple fluid connection points provide easy installation options
Overview
The WashTools Rinse Arch is an application arch designed to deliver high pressure, high flow liquid coverage to all surfaces of a vehicle. This arch is commonly used for rinsing away foamed product or for a final rinse before surface protectants or drying agents. It is also used for high pressure wax and surface protectant application. The stainless steel frame and manifolds provides long service life and minimal equipment maintenance. V-jet nozzles places on the top and side manifolds provide excellent product coverage on varying widths of vehicles. An air cylinder coupled to the top and side manifolds allows you to adjust the angle of spray during a vehicle pass to provide increased coverage to rear view mirrors and angled vehicle surfaces.
Tech Specs
| General |
|
Product Type |
Rinse Arch |
| |
Series |
Flipping, High Pressure, High Flow |
| |
Manufacturer |
WashTools |
| |
|
|
| Vehicle Clearance |
| |
Maximum Height |
90.00" |
| |
Maximum Width |
109.00" |
| |
|
|
| Final Installation Dimensions |
| |
Dimensions |
96.50" High x 115.69" Wide x 10.00" Length |
| |
Weight |
130 Lbs |
| |
|
|
| Required Bay Dimensions |
| |
Minimum Bay Height |
See Final Installation Dimension |
| |
Minimum Bay Width |
See Final Installation Dimension |
| |
Minimum Bay Length |
See Final Installation Dimension |
| |
|
|
| Materials, Construction and Finish |
| |
Structural Frame |
Stainless steel |
| |
Legs |
Stainless steel |
| |
Feet |
Stainless steel |
| |
Fasteners |
Stainless steel |
| |
|
|
| Equipment Mounting Method |
| |
Foot Pads |
(2) Stainless steel foot pads (10.00" Wide x 6.69" Length x .19" Thick) |
| |
Bolt Configuration |
(4)-1/2" Concrete anchor locations per pad |
| |
|
|
| Bearings |
|
Type |
(8)-Pivot |
| |
Finish |
Nylatr |
| |
Grease Fittings |
No |
| |
|
|
| Applicator Details |
| |
Manifold Material |
Stainless steel |
| |
Nozzle Type |
(2)-stainless steel 6502 nozzles, (3)-stainless steel 4005 nozzles, (4)-stainless steel 6503 nozzles, (2)-stainless steel 4002 nozzles |
| |
Application Flow |
15 GPM @ 1000 PSI (at the pump) |
| |
|
|
| Controller Output Requirements |
| |
Standard |
|
| |
Number 1 |
Flip Valve On (open) |
| |
Optional |
|
| |
Number 2 |
Fluid Delivery On |
| |
|
|
| Warranty |
| |
Manufacturer |
WashTools standard limited warranty |
| |
|
|
| Shipping |
| |
Parcel # |
Quantity - Description - Dimensions - Weight (each) |
| |
Parcel #1 |
(1) - Complete Assembly - 8.25" High x 12.75" Wide x 84.50" Length - 135 Lbs |
| |
|
|
Included
Items Included
- Stainless steel frame assemble
- Stainless steel top and side manifolds
- Stainless steel nozzles
- Air valve
- Filter, regulator and lubricator
- Manifold flip cylinder and linkage assembly
- Service Pack documentation
Items NOT Included
- Floor anchors and shims
- Low pressure hose
- Wash solutions (chemicals)
- Polytube
- Solution delivery system
Installation
The installation of the Xtra Service Arch is straight forward. The Service Pack documents that are provided with the product shipment include complete installation and startup instructions.
| General |
| |
People Required |
2 |
| |
Mechanical Skill Level |
Basic - Mounting equipment |
| |
Electrical Skill Level |
Basic - Wiring of air valve |
| |
Pneumatic Skill Level |
Basic - Plumbing pneumatic valve |
| |
Fluid Skill Level |
Basic - High pressure pump connection required |
| |
Chemical Knowledge |
Advanced - Detergent titrations may be required |
| |
|
|
| Tools and Equipment Needed |
| |
Unpacking |
Normal hand tools |
| |
Erection |
Ladders required. Measuring tools needed for positioning and hammer drill for floor anchors. |
| |
Assembly |
Normal hand tools |
| |
Startup |
Normal hand tools |
| |
|
|
| Estimated Timeline |
|
Detail |
This is the time estimate for installation of the detergent arch only. This does not include any electrical panels, controller wiring or other equipment or systems. |
|
Unpacking |
30 minutes |
|
Preparation Assembly |
1 hour |
|
Frame Erection |
1 hour |
| |
Fluid Connections |
1 1/2 hours |
| |
Startup & adjustment |
1 hour |
| |
|
|
| Electrical Utility Connections |
|
Air Valve Power Requirements |
6 VA @ 24 VAC |
|
Air Valve Power Connection Type |
1/4" Tube fitting |
| |
|
|
| Pneumatic Utility Connections |
|
Flow and Pressure |
.1 CFM @ 40 PSI |
|
Incoming Connection Type and Size |
1/4" Tube fitting |
|
Filter Included |
Yes |
| |
Regulator Included |
Yes |
|
Lubricator Included |
Yes |
| |
Outgoing Connection Type and Size |
1/4" tube fitting |
| |
Air Pressure Control |
Yes |
|
Air Flow Control |
Yes, (2) needle valves on flip cylinder |
| |
|
|
| Equipment Connections |
| |
Liquid Lines |
|
| |
Incoming Connection Type and Size |
1/2" NPT |
| |
Incoming Flow and Pressure |
15 GPM @ 1000 PSI |
| |
Air Lines |
|
| |
Incoming Connection Type and Size |
1/4" tube fitting |
| |
Incoming Flow and Pressure |
.1 CFM @ 40 PSI |
| |
Outgoing Connection Type and Size |
1/4" tube fitting |
| |
|
|
All efforts are made to keep these details current but all prices, specifications, availability and terms are subject to change without notice. Taxes, fees, shipping and handling charges are extra and may vary. Valid for United States online purchases through the WashTools site only. WashTools cannot be responsible for pricing or other errors, and reserves the right to cancel orders arising from such errors.
WashTools: RA-3720 Rev 01, JS/ST
|
|
|