|
|
Bumper Blaster Assembly, High Pressure
Price: Starting at $1,890.00
Options
| |
|
|
Overview
Features
- Pit mounted sweeping manifolds provide excellent high pressure coverage to the lower parts of vehicles
- Zero degree nozzles coupled with an oscillating stainless steel frame and manifolds ensure long service life and minimal equipment maintenance
- Hydraulic motor and linkage assembly ensures smooth sweeping motion of spray manifold
Overview
The WashTools High Pressure Bumper Blasters are designed to provide optimal cleaning to the front and/or rear bumpers and grills of vehicles. Mounted under the vehicle inside the trench, these blasters have a single manifold which houses (8) 0-degree nozzles and utilizes a hydraulically driven motor to provide a sweeping action across the vehicle surface. These units can be used as single units or can be spaced in groups up to 3 units that can share the same hydraulic and high pressure water pump.
Tech Specs
| General |
|
Product Type |
High Pressure Clenaing |
| |
Series |
Bumper Blaster |
| |
Manufacturer |
WashTools |
| |
|
|
| Final Installation Dimensions |
| |
Dimensions |
18.50" High x 8.00" Wide x 11.00" Length, Protrudes no more that 6" above the wash bay floor |
| |
Weight |
TBD Lbs |
| |
|
|
| Materials, Construction and Finish |
| |
Structural Frame |
Stainless Steel |
| |
Fasteners |
Stainless Steel |
| |
|
|
| Equipment Mounting Method |
| |
Pit Bracket |
(1) Stainless steel foot pad (3.50" Wide x 1.50" Length x .19" Thick) |
| |
Bolt Configuration |
(2)-3/8" Concrete anchor locations per pad |
| |
|
|
| Bearings |
|
Type |
(2)-Pillow Block |
| |
Finish |
Composite |
| |
Grease Fittings |
No |
| |
|
|
| Hydraulic Motor(s) |
| |
Quantity |
1 |
| |
Displacement |
1.93 cu in |
| |
Finish |
Painted |
|
|
|
| Applicator Details |
| |
Manifold Material |
1" stainless steel tube |
| |
Nozzle Type |
Main Manifold - (8) stainless steel 0004 nozzles |
| |
Application Flow |
15 GPM @ 1000 PSI (at the pump) |
| |
|
|
| Controller Output Requirements |
| |
Standard |
|
| |
Number 1 |
Blaster #1 On (Dual and Triple System Only) |
| |
Number 2 |
Blaster #2 On (Dual and Triple System Only) |
| |
Number 3 |
Blaster #3 On (Triple System Only) |
| |
Optional |
|
|
Number 4 |
High Pressure Pump On |
| |
Number 5 |
Hydraulic Pump On |
| |
|
|
| Warranty |
| |
Manufacturer |
WashTools standard limited warranty |
| |
|
|
| Shipping |
| |
Parcel # |
Quantity - Description - Dimensions - Weight (each) |
| |
Parcel #1 |
(X) - Description - XX" High x XX" Wide x XX" Length - XX Lbs |
| |
Parcel #2 |
(X) - Description - XX" High x XX" Wide x XX" Length - XX Lbs |
| |
Parcel #3 |
(X) - Description - XX" High x XX" Wide x XX" Length - XX Lbs |
| |
Parcel #4 |
(X) - Description - XX" High x XX" Wide x XX" Length - XX Lbs |
| |
|
|
Included
Items Included
- Bumper Blaster manifold assembly(ies) with hydraulic drive, linkage and guard
- Stainless steel 0-degree nozzles
- Pit mounting bracket(s)
- High pressure water manifold and valves (Dual and Triple System Only)
- Service Pack documentation
Items NOT Included
- Floor anchors and shims
- High pressure pump
- High pressure hose
- Hydraulic unit
- Hydraulic fluid
Installation
The installation of a High Pressure Bumper Blaster is straight forward. The Service Pack documents that are provided with the product shipment include complete installation and startup instructions.
| General |
| |
People Required |
1 Person |
| |
Mechanical Skill Level |
Basic - Mounting equipment |
| |
Electrical Skill Level |
Basic - Wiring of water valves (Dual and Triple System Only) |
| |
Pneumatic Skill Level |
NA |
| |
Fluid Skill Level |
Basic - High pressure pump and hydraulic connections required |
| |
Chemical Knowledge |
NA |
| |
|
|
| Tools and Equipment Needed |
| |
Unpacking |
Normal hand tools |
| |
Erection |
Measuring tools needed for positioning and hammer drill for anchors |
| |
Assembly |
Normal hand tools |
| |
Wiring |
Normal electrical wiring tools |
| |
Startup |
Normal hand tools |
| |
|
|
| Estimated Timeline |
|
Detail |
This is the time estimate for installation of the a Single High Pressure Bumper Blaster only The Dual and Triple Systems can be estimated by doubling or tripling the timeline shown. This does not include any electrical panels, controller wiring or other equipment or systems. |
|
Unpacking |
15 minutes |
|
Preparation Assembly |
15 minutes |
|
Frame Erection |
1 hour |
| |
Fluid Connections |
1 hour |
| |
Startup & adjustment |
1 hour |
| |
|
|
| Electrical Utility Connections |
| |
Water Valve Power Requirements |
15 VA @ 24 VAC per valve (2 valves for the dual system, 3 for the triple system) |
| |
Water Valve Power Connection Type |
(2) lead wires w/junction box per valve |
| |
|
|
| Equipment Connections |
|
Liquid Lines |
|
|
Incoming Connection Type and Size |
(1) - 1/2" NPT (per blaster) |
|
Incoming Flow and Pressure |
15 GPM @ 1000 PSI (for the single dual and triple system) |
| |
Hydraulic Lines |
|
| |
Incoming Connection Type and Size |
(2) - 3/8" NPT |
| |
Incoming Flow and Pressure |
2 GPM @ 300 PSI |
| |
Plumbing Configuration |
Series (Dual and Triple System Only) |
| |
|
|
All efforts are made to keep these details current but all prices, specifications, availability and terms are subject to change without notice. Taxes, fees, shipping and handling charges are extra and may vary. Valid for United States online purchases through the WashTools site only. WashTools cannot be responsible for pricing or other errors, and reserves the right to cancel orders arising from such errors.
WashTools: BB-1460 Rev 02, JS/ST
|
|
|